Setting up an M2 Card Reader
The M2 card reader can only connect via Bluetooth to an iOS device that has the Dockwa app installed. Be sure you are using an iPhone or iPad for this setup.
Step 1: Charge the Card Reader
Before your initial use, charge the card reader for two hours using the provided USB-C cable.
Step 2: Power On the Card Reader
When you’re ready to connect, turn on the card reader by pressing the button on the left-hand side of the device.
Step 3: Enable Bluetooth and Open the Dockwa App
Ensure that Bluetooth is enabled on your iOS device.
Step 4: Access the Sales Section
In the Dockwa app, select Sales from the bottom navigation bar (Shopping Cart icon)
If you don’t see the Sales option, you might be on the Boater-side of the app. To switch, go to Profile > Switch to Dockmaster.
To Pair the Card Reader
Select Readers in the upper left corner.
Choose the device you want to pair with. It may take a moment for it to appear.
Helpful Tips:
When powered on and within range, the card reader will automatically reconnect to devices it’s been paired with.
If the device is fully charged but still unresponsive, use a paperclip to press the reset button to reboot the device.
Additional Resources:
Still need assistance? Please reach out to our Support Team at [email protected]!